That's a thing I was confused about, it didn't! When my thermostat died and the car severely overheated I was literally spewing steam through the...
Ok, I will go and get a shorter one then, sorry about the horizontale vertical thingy, hard to explain clearly but hopefully the shorter belt will...
Good morning! Long time after the facts follow up question, the other day, I installed a new water pump and I used this opportunity to swap all...
Hi guys! I have a follow up question, last night my car overheating, engine light came on, waited a bit, opened the radiator cap, was fill with...
I managed to talk the Water Pump out without taking the radiator off, it was quite rusty and barely turning. I replaced it with a new one with...
Thanks guys, thanks to your assistance and my tools it's now running again :)
and bonus one, my fan shroud is in dire condition, where could I find a replacement?
Thank you guys for all those advices. One more question, I will have to drain fluid anyway, when I put it back in at the end, how do I bleed the...
Thank you! If I decide to swap the water pump, is it easier to drop the radiator first for more room?
So it is def wet below, the thermostat housing is also slightly leaking as it seams the gasket is dead. But mostly the below of the water pump is...
Thanks! I will check those
Thanks, it's a 250 straight 6, I will look on line then :) Cheers
Hey! So there's a coolant leak coming from where the collant pump is, how could I determine if it's the pump itself or just a gasket that need...
Thank you! Very instructive!
Hi guys! Finally had my power steering pump rebuilt and I am putting it back in, quick question, how do I know if my belt is too tight or too loose???
Thanks for the heads up, replacing it it's gonna be then, hopefully that part is doable at home?
Hey Guys So after rebuilding the control valve and slave cylinder (or what ever it is called) now my Power Steering pump is starting to give, I...
Front suspension was all greased up a year ago when I fully redid it. Socket at the end of the valve as I rebuilt it a few weeks ago.
The piston was rebuilt professionally (so not by me) 2 years ago. I am using Ford approved one, can't remember the brand, could that matter? If...
Ok, that's exactly what I did, torque wrench to 100 then 90° back. So I won't touch it. So my stiffening of the steering as I drive has to come...
Separate names with a comma.
