MavMan could fab us a late model apron like that. :bowdown:
I love that Mavistang, or is it a Mustvrick or Comstang ? :rofl:
What about one like this, is it plastic or fiberglass?
Get a rat trap and bait it with a small pice of cloth rolled up, with peanut butter in it, bend catch open for a hair trigger. That's the only way...
JB weld with thin metas strips across the cracks on the back side. Then make a mold out of clay and pour it with polyester resin with powderd...
Yes mav70 I do have a bag of gussets I got from Jega when I bought the rollcage, thanks.
The supports are 3/16 thick and welded to the front subframe where they cross.
Yes they are welded to the front subframe top and bottom
My floors were so rusty I needed to put in these supports for the rollcage door bars.They really help strenthen every thing up. For the main...
This is the look I want! :2thumbs: I have 620# springs cut 1 1/2 coil with a 1 1/8 sway bar and all new front end parts, upper-lower-saddles-rod...
What's your opinion? OK all give me your best guess, what size wheele & tire combo is this?
That's what I want to do with my 73 comet just move it back, I think that is a lot easier than to swap the fenders and valance on an original car.
Rusty door My drivers door looks just like that and I thaught about fixing it, but a friend here in town has a parts car and will sell me a door...
Big Rack Could that rack be layed back 45deg. to the fire wall and mounted under the centerlink? Who has pictures of a slimmer rack or one...
Big rack What's the point of putting that BIG rack into our cars if the headers don't fit or need to be "modded" with a sawzall?...
espo busgings That sounds like a good plan, I think a 5/8 steele sleeve like the one in a used front bushing would work. Mavaholic did you get a...
The stock bushings just seem to be verry sloppy and I want a good tight fit to prevent wheele hop and excess body roll. If i need to I will get...
sloppy bushings Are these bushings supposed to be so sloppy?
got springs but Got springs but be aware rear eyes are larger than stock, now I need to find correct size bushings.
Separate names with a comma.
