Thanks for all the input guys!!! To address the reversed violet and green wires I accually reversed the the leads and the motor ran WORSE so I...
Thanks Darek ! How did you troubleshoot it to be sure? As I recall the puple and green go to the distributor. It's been a few months since I wired it.
Well just double checked the pos. and neg on the coil they are right orange on pos. and black on neg. I also checked the voltage to the box...
I never thought of that. But would it run at all if it was reversed?
That's what I'm thinking......but what would cause it ?????
Ok I read an ealier post on this topic. It seems that plug gap is variable . Each set-up a little different. Now my problem is I could not even...
Well every day is chance to learn something. I learned that even though the AOD is a 4 speed transmission there are only 3 forward shift...
Thanks for the reply , My problem is that even with the shifter out of the car the shifter will not drop into the 1'st gear detent on the shifter,...
Hi Guys , I'm working out the final bugs on my car when I noticed that my BRAND NEW B&M Hammer shifter did not go into first gear. This is an AOD...
http://www.fordmuscle.com/archives/2001/06/project460/ This is the article I use as a guide for my prodject. It's about the Mavericks big brother...
When I installed my 351w I cut aprox. 2 " out of each shock tower then covered the hole in 1/4 ' plate steel to make it stronger . Leaving the...
Nice job ! That car looks Great :tup:
Thanks , on the motor I was talking about there were no power brakes , as I recall , I just used that port on the manifold . Can that still lean...
Thanks for that thought too . I thought I had run the PCV to the brake booster port on another motor I put together ,but that was LONG ago and I...
Yea OK I'm blind! I just checked ,there is a port just where you said....THANK YOU!
Thanks I'll look! I thought I had already checked . But I've been known to blind before:idea:
Hey Guys , I,m putting the finishing touches on my Maverick and discovered I have no place to put my PCV hose on the Holley I have . My Eldebrock...
I'm not 100% sure about the root cause but I think I still have a grouding problem. Reducing the gap on the plugs was only a band-aid . But now at...
Yeee...haaaa Yep you guessed it I made her run last night!!!! :bananaman I ended up flooding it a couple of times. I had gaped the plugs...
I verified #1 is on TDC with rotor on #1 wire. When I checked that I had spark it was with #1 plug removed and grounded. I doubted myself on...
Separate names with a comma.
