Great thoughts ! I am getting popping in the exaust and I've had the plugs out several times .Usually after trying to start for a few minutes the...
Thanks for all the thoughts Guys , I have checked the spark at the plugs ( I used a jumper wire clipped to ground and the plug I HATE BEING...
Thanks for all the sugestions. I probably wasn't clear on the rotor . The rotor was pointing at the #1 plug wire. Apparently if I have good enough...
The title says it all ! I put this motor together about 1 1/2 years ago and then went on with the car . This week was finally time to start it up...
I see by the link the mechanism needs to be bolted in. I,ll try that with some grease. I'm just glad others have had this problem too.
:hmmm: It,s been a couple of years since I took my Mav appart and I remember having a #*&# of a time taking the window mechanism out of the window...
Thanks !!!!! Don't why I didn't think of that????? Thanks alot I guess I'm too used to the older ones
Yellow wire I have a 73 wire drawing it show a heavy yellow wire that provides power to the headlight switch that comes off the starter relay and...
I'm in the process of wiring my neutral safety switch from my AOD on a 73 Mav. It was originally a floor shift auto with a/c. This car has not had...
Thanks Thanks for the info . I'll take a closer look at the box of extras I have . Maybe all I grabbed were front ones by accident I worked on...
Well most of the hard work is finishing up after 3 years on my MAV . Now I'm putting the the odds and ends back together . And I'm finding my...
Thanks for the response . Thats a pretty high recomendation . I'll feel alot better about experimenting with them now!
I'm considering using Competition Engineering Slide-a-link traction bars . Has anyone had any experience with them?.....Thanks
Thunderbird ! For the ultimate womans car I bought one of these for my wife ( I think it's pretty cool too)
Lowes had some that worked just fine . The selection at our small town store was slim , but I bought some that were only slightly too large and I...
Looks like a GREAT car to start with . When I have friends new to the hobby I always remind them " RUN SHE MAY ...STOP SHE MUST " So if you plan...
Thanks for the replies......The headers I,m using are from a 1st gen mustang 351w conversion from Headman. A VERY tight fit indeed . I had to cut...
Hi Guys...Just an attempt to post some photos of my engine bay . Not quite done, but it will be.......
Thanks for the QUICK response . I checked the help section at Auto Zone (no luck) I'll go to Lowes tomorow. THANKS AGAIN
Hi Guys , It's been a long time (3 1/2 yrs),but I'm finally putting my 73 Mav back together . I got my 351W to fit with an AOD , the paint is all...
Separate names with a comma.
