A trick for plug clearance on GT40p heads is to take the stock explorer manifolds, cut all of the tubes off, grind the mounting flange flat and...
you can tune a speed density EEC and be fine with headers, cam, intake ect. I just have never done it. alot of turbo guys use speed density.
I just bought the strategy (ctbae) if you need anything deleted like downstream O2 sensors let me know.
They are speed density as well as the mark VII.
there is a "Engine" light in 75 and up mavericks. It comes on when the oil pressure is below 7psi or the coolant temp is above 250.
So now you have a branded "unbranded animal".
if the ECM is a SLL4 I don't think tweecar has a strat for that yet. I bought a license for one thats incomplete from popsracing (I am the first...
Drain the coolant, then blow through the heater and upper hoses with shop air.
A header trick that works on everything but I never tested on a Maverick was to take the stock Explorer steel manifolds and cut all of the tubes...
This is great!! Now when one of the wiper speeds stop working I get to replace a $700.00 module. That greatly improves my posture by not having...
Yes. But what alot of guys are doing is machining meterial out of one of the hats and milling 2 slots to accept a 2 ear clutch. Then they use a...
Isn't the 85 motor still a flat tappet cam? Never-mind, mustang got the roller first.
if you use MN12 or SN95 accessory brackets it moves the accessories down and has a provision to mount the coil. 89-93 Cougar-TBird and 94-95 mustang.
If nobody s interested in the used limited slip you have shoot me a PM. I have a 8" track-loc that is basically a open housing machined to accept...
You can buy a side saddle adapter for $10.00 so that you dont have to install the quarterhorse in the EEC. The only reason you have to open it is...
WIX all the way for every filter I buy. Napa gold filters are made by WIX and it says so on the corner of the box.
J2 is the USB adaper to burn the chips. Quarterhorse is the hardware that plugs into the back of the EEC to load tunes onto and data log. Also you...
I use the qurterhorse for all of my cars and once I get everything dialed in where I want it, I burn the tune to a $60.00 chip that I can leave in...
Qurterhorse and binary editor.... Nuff said. www.moates.net/ for the hardware (qurterhorse) and software (binary editor) and...
Go with EEC-IV and a distributor. I have 2 complete explorer engines and harness, and a explorer setup in my maverick that I use a A9P ECM from a...
Separate names with a comma.
