In here: [IMG]
Both posts are correct. I found that when using all poly with supspension components that are made for rubber, you can also run into problems....
Most Mustang catalogers have them. I use National Parts Depot, but others have them as well.
Did we drift off topic? Looks fine to me. The Pertronix I will tolerate the voltages from the factory resistor wire, which can be as low as 8v....
Here is the ride height, the rears are lowered with custome springs too: [img]
Most aluminums are two core, but they are bigger tubes, so it's a tough way to measure. I would definitely put a switch in there.
I guess I must be really lucky then. I bought lowering springs for both me Mav and my Fastback and they both lowered the car as advertised. I know...
Agree with BossMav 100%. Not only are the heads betterm but you don't have to spend 100s for custom exhaust.
Actually, you need both sides open. The airflow circulates much like a cooling system does. One side is a fresh air intake, the other is the...
Yes, run the PCV system. It will keeop your valve covers clean.
Ah, I see Paul. It sucks that you have to go through all this work to get what is fair.
The reliability has been proven over time, which was the main concern initially. Going on 8 years with mine.
StaBil is the stuff to use for long term storage. You will never need gas line inti-freeze in Memphis. You guys don't really get a winter down there.
Why don't you just insure it with a classic car company like Hagerty and pick your own value? This sounds like a lot of work for a $3000 car.
Apparantly every time a price is posted. We get it, OK? Give it a rest.
Solder and shrink tube is the only way to go. If you want a feed for your radio, just get a test light and look for one. Pick a switched one, not...
Normally toe will wear more evenly across the face of the tire. You can see the scrubbing, but it will usually be even. Usually when wear is...
I just used 550lb 1" lowering Mustang springs. $75 and you get improved handling as well as ride height. Also a lot less work.
People really get caught up on airflow numbers of a bench, and the old addage if "if big is good, then bigger must be better" gets applied. I am...
LOL.....waaaaah waaaaah waaaaah...... ;)
Separate names with a comma.
