This is the first model. It's a bit crude. I couldn't get the reducers from Flowmaster overnight, so we cut the 3' extenders and put a taper on...
Well, we made a set. We'll see what they do.
Well, now off to my muffler shop to see what we can put together by Friday. :tiphat:
I had 18" header extensions on it. I painted them so I could tell where the paint burned off with the intention of cutting them off at that point....
Decided to replace the aging EquaLok posi. It was not spinning both tires in the water box. I installed a 28 spline spool. Not my first choice,...
That's all true about power adders. But, I race 1/4 mile and I'm already on the shift light and sometimes the rev limiter going through the...
I did not write anything in the article. I assume that "The Right Curve" edited the author's article and the author was not happy about. I have...
What do you guys think of this? http://www.crankshaftcoalition.com/wiki/Cam_and_compression_ratio_compatibility
Here's some good info. http://www.crankshaftcoalition.com/wiki/Cam_and_compression_ratio_compatibility
I'm running factory manual front discs and drum rears. Not the best for short stopping distance, but it stops straight and there are no surprises...
Three weeks with no racing. Won't get to race again until the August 30th. I'll have to retrain myself again!
Miserable weekend of racing. Fought the weather all weekend. Wind caused us to have to go to 1/8 mile on Saturday. That was after time trials at...
The good stuff!
I'm definitely having fun. My winter project will be fixing the shortcomings of this engine/car. For sure, I'll install the short stroke...
Greg, the cam is a COMP XE282HR. 35-522HR-12, Hydraulic roller. 232/240 at .050. Advertised lift of .565/.574. Actual valve lift measured with...
"I know a some guys at roush racing" That sure is helpful!
Dan, why would I do that when I know it valve floats at 6200? At a minimum valve float hammers power. At a maximum it breaks valvesprings and...
I have not. I presumed that the more pre-load I have the earlier the valve float. Do I have that backwards? I have the rev limiter at 6100 now.
Looking good!
Recap of last night's Firebird effort: D- I kept it shiny side up so it's not an F! It was the first hot day of racing so far. It was 91* for...
Separate names with a comma.
