Let get her running first with what you have. I don't think the new carb would help. If the carb was bad I don't think it would start right up and...
Porterfield makes the best brake shoes. They are the best up-grade on drum brakes you can make. Just make sure brake system is up to speed. Look...
Need some more info First ,what kind of Carb, Engine and Dizzy(Electronic or Points) do you have? With the engine cool I would first start with...
Hi. I have a 1972 Maverick Grabber. It has a Procomp 7002 ready to run distributor. The rotor broke . Dose anybody know if Procomp uses a...
Did you put any gas in the car? If you did and it ran great, then it might be you fuel tank pick up. But It dose sound like a fuel pump to me. If...
Hi, where are you getting the gas to pour into the carb? Are you using the gas from the fuel line,or from a gas can? If you are using gas from the...
Hi, I have a 72 Grabber that I just put a Holley 670cfm with a electric choke. Holley says I need 12 volts. I checks the S terminal and it only...
Hi, dose it still have the stock dizzy ,or has it been replace. ? since the stater will turn over, (dose it spin fast or is turning slow?) let...
The timming marks on my 72 302 are on the Harmonic damper. If you can't find them(could be years of stuff hiding the marks) use a vacumm gauge....
Looks like you are on a roll.
Thanks for info . I had to used some sheet metal screw for now. I like the idea to use rivit nuts. Where do I get some?
Going to mout the shifter to the trans tunnel. The Grabber had the auto shifter on the tree. Someware along the way it was move to the floor....
Hi, ready to mount my floor shifter(Mustang C-4). Going to use 1/4 x20 x3/4. What size drill bit should I use before the tap? Thanks:drive: Tony
Thanks everbody for the info. I don;t know if the trans lever has been flipped when the mod was done. The trans shifter arm hole for the rod is at...
Hi, I have 1972 Grabber with a C-4. Some were along the way somebody converted the column shifter to a floor shifter. I put the plastic bushing...
Kept the 750, it time to come out and play. 1. First let check some easy stuff, check the holley mount bolts. 2. Check the intake bolts. 3....
Hi, on my 1972 Grabber my C4 will shift at 3800 rpm, if I leave it in drive or put in frist . I just check, there is no kick down rod. I was told...
No pickture didn't happen. But in 1964 my brother did this to 1958 ford! We called it Sky high.
If you want the Jack up look, it your car. Put the leaf spring on top of the rear end.
If your carb is the 4160's 600 cfm and your friend's carb is the 4150 650 dual feed carb then jump on it. But if there are both 4160 single feed,...
Separate names with a comma.
