I was lucky enough to find 2 NOS grommets. The only 2 that I have found. [IMG]
You said expensive, not a pressed pepsi can:D
The kit is completely bolt on. You will need to press the rubber bushing out of the front eyelet in your leaf springs and replace it with the...
[IMG] [IMG] Brand:Moroso Manufacturer's Part Number:20533 Part Type:Oil Pans, Individual Product Line:Moroso Drag/Road Race Oil Pans Summit...
I would use a Moroso 20533 oil pan. It has billet end seals that will prevent leaking in those areas versus a stamped pan....
Thanks for the information and feedback on the Dyna Mat! I am getting ready to go up the firewall but want to make sure I cut around the openings...
Here are the pictures of the start of the DynaMat install as well as the Dyna Liner on the roof of the car. [IMG] [IMG] [IMG] [IMG]...
New seals, blower motor, squirrel cage, heater core, and all parts blasted, painted or powder coated. Plus I polished the metal part the blower...
I am almost finished with the heater box rebuild and restoration. I didn't get any pictures of the inside. I realized that I didn't take any...
It looks like they were trying to seal any possible air leaks in the box. I blasted and powdercoated the plate. It is clean and reassembled. I...
The spare airbox that I tore apart had some sealant on it. I had to pry the blower motor plate from the box.
Ttt:)
The hood looks awesome! The car is not to shabby either. I cannot wait to see it take its maiden voyage.
I was wondering if there is a seal or sealant between the blower motor plate and the airbox? I am rebuilding mine and did not see a seal that...
Depending on power and torque that you have will make a difference on how the gears will react. I had 3.73 in my mustang and found that it was a...
How about some pictures of the front of the hood? That is the main area in question.
Thanks for the hard work. It definitely will take some getting used too.
1450 miles one way and 21 hours of driving but at least it is one highway the entire way.
The 73 will not be RIP. I already have a buyer that is going to make it a drag car once I am done with it. It is a no title car.
I wish I could go but that is one heck of a distance. Sounds like a blast!
Separate names with a comma.
