Doesn't sound like easy access.
How far are you going with this car? If you are in it for the long haul I recommend getting it blasted. You finished product will look better...
Nothing but metal and wiring on some.
I have been torn on which way to go on mine. I was thinking about just going with Dynamat Extreme just because I know I should not have any...
The front kit does add additional width but the rear kit I believe does not. I don't think the front kit adds 3/4". It is posted in the kit that...
There is plenty of room to go with 4.25" back spacing to instead of 3.5" like I went with. There was no reason to have to move the springs.
Quote: Originally Posted by Cruzin Illusion [IMG] We are installing Bridgestone Potenza RE11's 245/45/17's on the rear and 245/40/17's on...
The Caltrac's system should take car of any of the axle rap. I am only using 1/2" blocks so there is also not that much additional leverage. The...
Yes it does clear but it is close. I took the back spacing measurements from Maverick Man's website. I also rolled the fenders all the way...
I will wait till it is completely back together before making further adjustments. I did plan on installing another 1/2 lowering block but I...
I received the Calvert Racing 1" lower leaf springs or the back half of them. The front half is the same so they sent just the back halves so I...
The oil pan is notched, tig welded, and leak tested and looks really good. I really wish the manufacturers welds look as good as the new ones....
Here I some pics of the shave that was done on the car I am building. http://mmb.maverick.to/showpost.php?p=1000715&postcount=691 Sorry for...
Yes it was placed at the angle and height to match the factory tank. It is just centered for additional clearance for dual exhaust and is not...
Here are pictures of the fabricated stainless steel tank for the car, the straps and the other items for the tank. [IMG] [IMG] [IMG] [IMG]...
Here are pictures of the fabricated stainless steel tank for the car, the straps and the other items for the tank. [IMG] [IMG]...
I found some that work perfectly at NAPA part number 650-1100 They had rubber bushings that come with it but you can discard them if they do...
Heck Frank, you are one of them.:rofl::bowdown:
I am using a 2 wire fuel sending unit in the tank that was built for the car to work with the EFI set up. I was going to use the isolator...
That is the same type stuff I was looking at. I was planning on running a seperate ground on the sender.
Separate names with a comma.
