Originally Posted by rayzorsharp: 17 volts at the battery is way too high. The regulator should cut it off around 14.0-14.5. Anything over about...
Check the charging sys, it sounds like the battery is carrying the entire vehicle. The charging sys "should" read 17 to 17.5 volts when the engine...
Planning to install the steering Column tomorrow or the next day,weather permitting.
I have a '71 Comet 2 dr, Red exterior and black cloth buckets/bench seat interrior that I picked-up just awhile ago and have just begun a total...
RMILLER...What did the parts for your Brake System upgrade come from? a later model Maverick/Comet, a Mustang, a Granada? or what. kafrompa...
I have a '71 Comet with a 250 I6, did a compression test to find 0 lb in #4 and 60 lb in #5 ,(I hope the block hadn't burnt a "notch" between the...
Brake Bleed SOP ALLWAYS begin the brake bleed at the furthest wheel from the M-Cyl, right rear 1st, left rear 2nd, right front 3rd and left...
Are you runnin' a two stage carb? perhaps the secondaries are in need of adjustment, (opening too far too soon), just a thought...kafrompa "Garv"
final QA Did you check the float function and float level adjustment?
Though I drive through the valley of imports, I shall fear no turbo; For torque art with me. Thy eight pistons and pushrods, they comfort me Made...
Just discovered that the VIN shows a "L" in the fifth position of the VIN and my Motors manual identifies the "L" as noting the engine being a 250...
Put a battery in the Comet and did a compression test, bad results, #4 has no compression. I'm hopping to get it running next week, drain the...
I appreciate your feedback, the only keys that I have will NOT work in that lock cylinder. I have had a Locksmith make a new key for the ignition...
The Ignition lock assembly thst I took in to a locksmith seems to have been declared "beyond Repair". Do any of Y'all know where I can get a black...
I dissassembled the steering column to get the ignition tumbler out and took it to a local locksmith to have a key made for the ignition, should...
I did that last week, had the door and trunk keys made BUT the ignition hasn't accepted either key. my only other option would be fabricating a...
I still haven't got an Ignition key so I took the steering column loose from the dash, removed the steering wheel and turnsignal switch and...
Paint job ESampson....I think you should approach your painter and present him the same outline of your negative findings as you have posted...
lock Cylinders 71gold...The vehicle, 1971 Comet had been impounded and stored in an outdoor compound. I've been applying WD-40 to the Ignition...
lock Cylinders I just replaced two (2) door lock and one (1) trunk lid lock cylinder (total of three (3) lock cylinders) and I'm about to replace...
Separate names with a comma.
