Does the coil get really hot? If so, maybe the coil is going bad,, maybe the main power wire to the box itself losing power? bad ign switch,,,...
Dont be revving it up with in the first 30 minutes of operation, try to keep it under 2500 until you know it runs right. If you have used assembly...
My 69.5 had the 200, it has a long throttle cable to reach clear over to the carb, and the bracket it bolted to. The kickdown was hooked to the...
I use a 7 psi Bendix pump on my EFI to feed the high pressure pump. Its loud until the gas pressure builds up and goes very quiet. I like electric...
Yeah, for the most part, the EFI worked great! It stalled twice upon coming to a stop, next time I did, I put it down in low and slowly brought...
Thank you! Just glad to see it going down the road!!! :drive: When I get the kickdown, "handle" figured out where to get it set,, Im looking for...
Well, it went down the road!! HAHAHAHA!!! I put about 25 miles on it, I wanted to go further, but the car had other plans,,,, First off, the C4 I...
I have had this car for 13 years now. I got it from my uncle who was the second owner of the car, which came from Florida. Ive had fox body...
I had a 88 that did the same thing, bad tank pump was the reason on mine. It would have just enough pressure to run, once I poured gas in the...
Id go EFI, in fact, I did!!!! I aint looking back! As Shadowmaster said, the Painless wiring harness is the best way to go, other than building...
Does any one know of a conversion kit to replace the front coil springs with air bags? Thanks! Chad
Bluegrass, I can now answer the question you asked when I started this conversion. "WHY EFI"? That was a learning experience and a half! I got...
Aint that the truth! Lots of wires to hide still. CHad
Yeah, Im building a spacer that goes inbetween the mount, and the tranny. Just have to get longer bolts to hold it together. Chad
http://www.rieckesbaysidegallery.com/programfiles/talers/sefi%201.JPG Think she will run? I had the computer running with the carburator, Huge...
LMAO!! Looks like a taped up wiring harness. till I put the snakeskin around it. Ill take a picture of the table top SEFI!!! Ill post it. Chad
I dont think I could have done this without the help from people that know what they are doing. I doubt, Im the only one who has done this,, LOL!...
Update!! Tonight, I finished up the wiring harness. Bluegrass, I bypassed the eec relay for now till I get one, I have a spare, complete sefi off...
Put check in mail please. I'm like a lawyer 100$ for the service and 50 cents for the part. Good luck. Well sir, all I can say is thank you...
This may sound kinda crazy,, but has anyone thought of finding a turbo off of a farm tractor??? most of those are set up for peak boost under 3000...
Separate names with a comma.
