they have the same motor mounts. i just heard that a 351 barely fits in the engine bay, might need to get some tight fit headers to work.
your good, you just kinda scared me for a second! i thought i had to take the timing cover and everything off again :whew:
wait never mind im wrong about that, but i still think its on the right way though. that bump covers a oil passage i believe and helps lubricate...
I dont think it is, the retainer plate has two sides and one side says "BACK". so its on the right side, and there is no way the outlet can cover...
when i had the block bored out i told the guy to put in all the freeze plugs and the oil plugs. Dont know if it is his fault or it just happened
found the little ****. first time i was happy i found a broken part...because if all the plugs were in i would not know what to do!
ok the oil is fine..drained and put a magnet into it and picked up no metal shavings, just glitter which is fine. ran the oil pump with valve...
Well i thought i had a 289:huh: the guy i bought it from said it had the stock tranny and a 289 our of a stang. but when i pulled the motor and...
well i have been a member for...one year and a day and i dont think i have really shown pictures of my maverick yet so i think it should be time....
welcome, im 18 too :2thumbs: Do you have a pipe bender? i made custom exhaust for my mav (302) i have long tube headers so it was pretty simple,...
well you didnt have to pay for the maverick so your off to a good start so far!
counterclockwise as believe correct.
The pump is not locked up and the shaft is not broken and the clip is in where it supposed to be (as i suspected). i removed the filter and put on...
oreillys is a great store. i love them, if you just need a stock replacement part they will probably have it in stock, if not they can ship that...
yes i am very aware of how serious of a situation this is right now...i also have to break in the cam too. hopefully i didnt damage that ether....
thanks a lot guys for the input, i built the motor myself and i did use silicone on the oil pan gasket, not a lot but im sure that could be a...
my bad sorry bout that, pick up should be the same if its the same pan. for a pick up i would do this-...
im pretty sure the shaft is in correctly..ill mess around with it more later today. I am trying to come up with other reasons why i would be...
http://www.oreillyauto.com/site/c/detail/MEL0/82S/02336.oap?year=1973&make=Ford&model=Maverick&vi=1132175&ck=Search_02336_1132175_-1&pt=02336&ppt=C...
I made her breath for the first time! I had an oil pump issue in the first 8min of the break in so i had to stop:(
Separate names with a comma.
