Thats aweseome, thanks. It should print on a standard piece of printer paper
If this is just a kickdown... I don't see what it would make a difference. Now a cable for a AOD would be another story... right? As far as I...
Are you saying its better from a dead stop? Because you should notice 0 difference
As long as you like the way it drives, that's really all that matters. The converter you have may not be a perfect match, but as long as it...
I've never mounted a box in the trunk... atleast not screwed to the floor. That's why I was asking. I wasn't sure if he was trying to screw/bolt...
I've reused pushrods many times in stock motor rebuilds. If I was building a motor for alot of horsepower, I'd definately replace them with...
What do you mean it picksup a lot better? Like if your going down the road and mash the gash it accelerates faster? I've never ran a kickdown...
I think it sits fine as it is... BUT like Frank said, without knowing if they are flat or not, I couldn't tell you if they need replaced.
Why would you need to drill the floor for subs? Curious minds want to know
I dont see why the converter wouldn't work... your not running a huge cam so it shouldn't need a high stall converter either
I dont really know what your talking about green dot valve body so I could be wrong, but I dont think it will take off in 3rd
It seems to me he burnt out the band and just thinks its stuck in third gear. But I could be wrong
How do you know its stuck in third? Can you take off in second?
Looks good! And thats why I did mine that way
1 5 4 2 6 3 7 8 is old/most common ford I always drop my dizzy in, then run my plug wires... not the other way around
Wow, never knew Edelbrocks didn't come with that... Every single one I've seen just needed a throttle ball to bolt onto the carb... Even the...
Pulling a vacuum is required regardless to fill an empty system. And replacing the accumulator or dryer is also important, as well as the orfice...
Good advice given! Only thing i can add is that if you go to put the distributor in and it's not directly pointing at a spot on the cap for a...
Im not sure about those "next gen" floats but I'm assuming they still have to be set if you tear it apart. It comes preset however. From what...
A large bellhousing c4 is still different than a C6
Separate names with a comma.
