Dan, it looks to me like the seats you have aren't set up for the cat hump. The frames on both seats look the same in the pic you posted....
2 more here: 77 to be put back together and a 74 LDO for parts. Brings it to 232.
I like the idea but am not sure how well it will work. The upholstery clips onto the bottom of the seat frame and isn't the 75 frame shorter than...
Dan, I have a set of 74 LDO seats that I was going to try putting in a 77. This is a different problem in that the floor is too high for the...
How did you mount 5" gauges in that cluster? Do you have pics of the back side?
Here is what I would like to see in mine but it is too big.
I have the complete donor car on hand so I can figure out what goes where and that is why I figured I would use that system. The heater box is in...
Has anyone ever put a factory air system in a non-factory a/c car? Mine had a dealer installed a/c system installed and I am switching to a...
Are you sure about this? My 77 without a/c has no vacuum controls on the heater, just 2 cables controlling the air output. I think only the a/c...
Where can i find the insulation material for under the carpet and on the firewall? What have you used there? How about the foam used to seal...
Along these lines, is there any problem with moving the VIN tag when you switch out the dash? I can't see why that would be an issue.
Was that T-bird column a bolt-in fit?
When you say "Adjust the preload for minimal steering wheel play.." where do you start from? Is the adjustment bolt supposed to be turned down...
Is this the right part for a maverick? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=46098&item=7925783276&rd=1
How about these? That "knob' of the bushing is towards the outside of the car. I don't know if this cowl picture is what you were looking...
Is this the bushing you are talking about?
Here is one table for speedo gears. http://www.tciauto.com/components/speedometer_gears.htm at least it shows the colors of the various gears.
It was free when I did it a year ago.
I have a 74 LDO with a paint color of 3M and a trim code of PE. I like the interior color but need to match the paint. Any idea what it is...
I haven't tried posting a picture before so I hope this comes out. Does this help? It shows where my canister was on a 74. It is right below...
Separate names with a comma.
