just curious why doesnt anyone use a cable engaged OX locker?? From my understanding its locked when you pull the cable and you keep your...
just orderd the granada rotors, brake lines fittings and the mounting plate from speedway. got the rotors at autozone for 46.99 each total its...
ok im guessing my eyes are just a little off. this side (passenger) is just a bit more pronounced than the drivers side. the idiot that did that...
so i finally got the lower control arm bolt off of my maverick it took a sawzall with bad batteries and a mini hack saw, but its off. so when i...
i read through the comments you dont actually have to weld on the dog leg brace as he calls it. his engineer buddy said 2 bolts would be...
i personally wouldnt use grade 8 bolts id go for 12s or cat bolts. just my personal preference. anyway that i could keep my rims theyre 14s the...
http://www.fordmuscleforums.com/braking-articles/491839-cheap-big-disc-brakes-mustang-falcon.html what do you guys think ive been thinking...
are you sure you need it? i bought that same cable i just used the metal one right next to that and put it where the old cable came undone from. i...
heading over to Paso Robles (ca) to try and find parts for my maverick. i already know they dont have any mavs there. what disk brakes can i use...
hate to thread jack but can you send me some close up pics of those shock tower supports. im planning on making my own, and the ones you have are...
the 6462 is what summit sent me instead of my timing chain :O
im guessing its the last diagram i think its just like the petronix kit. this is the one i used http://www.summitracing.com/parts/ACC-2020/
stock distributor just replaced the guts.
i have a blaster 2 coil, a new msd 6462 ignition with the boost controller (no turbo or supper charger so im not going to use the adjuster knob)...
its a very simple set up i did it in my maverick mine used the same mounts just make sure you have a CABLE cutter to trim the line. you also need...
Separate names with a comma.
