That ballast resistor is to reduce the voltage to 8 volts when running, so points don't burn out. I believe Petronix requires a full 12 volts....
Installed the gas cap locking kit from Mustangs Unlimited.
I would get rid of that rubber hose at the inlet. The way it is reacting it doesn't look like fuel line.
You could put a fitting on the gauge with a copper line. Cut off the copper line leaving about two inches. Then slip the rubber hose on it.
9.31 at 76.26
I really enjoy the AOD. I took a 600 plus mile round trip to Carlisle with 4.11 rear, I cruised comfortably at 2200 rpms. If you don't intend to...
Don't want to disconect the secondary. I'm only interested in performance, not gas mileage. I drove 626 miles round trip to Carlisle and I...
I took the carb apart. It had 66 primary jets and 76 secondary jets. I left the 66's and changed the secondary to 72's. It had a 30 primary...
Are you talking about accelerator pumps, or power valves? Do I understand you, to say, I should have a 30 in the primary and a 50 in the...
I am going to get an overhaul kit and go through the carb. I don't know what it has in it.
When I said rich, I didn't mean gas mileage. I meant performance wise.
It is a 0-47762. I have a 302 with windsor heads, cam, Edlebrock Jr manifold, AOD trans, headers, and 4.11 rear. I bought the carb used. It...
What is good starting size for the jets in a Holley double pumper with mechanical secondaries?
In Connecticut, we don't have any drag strips. What we have are people that move into a developement next to a farm, and then complain about the...
Wheels I'm not positive, but I think they are Ansen Sprints.
Great Job!!!!!! I am a fan of scallops.
What color is you headliner?
Why not get an aftermarket gauge, such as a SW, and matching sending unit? If you are running a fuel cell, you probably don't care that it won't...
I also have Frank's crossmember. It is a perfect fit.
I have the AOD with a 4.11 rear. It will cruise easily at 2200 rpms. I don't care about gas mileage.
Separate names with a comma.
