my 86 was floor shift. aod.
what is the chamber size .210 is the port volume.lot of head and cam for the gear.
road trips are fun. I brought one from prescott az several yrs ago. what a hoot. glad you had a good trip.
try posting on tffn.com that is a falcon site and may well be able to accomodate you better. there are several suppliers for the floor pans,...
mostly what was used before the cherry picker.
Crap,I have trouble remembering my name, much less a firing order.lol:) Got It written down now.Just have to remember where!!
Way to go!!!!:yahoo: thanks ,jim.
Anyone have the 200 6 cyl firing order? please .thanks, jim.
i have 2 lokars and no problem. I had a problem with my shifter and they sent parts out ,free. just let them know.
I have always heard this. I put a teaspoon of sugar in 3 oz of gas and it hasn't disolved in 3 hrs. I have always heard this,and wanted to do it.
PaulS ,where have you found that the 69 head has a smaller comb chamber? I have measured several un cut heads and they are nearly the same as the...
mavman is absolutely correct about the valve relief. they are cut for the 1.94 valves. Had to flycut pistons in the block to over come this. I had...
There was a good crowd there when we got there. Brian made 2 pulls while we were there. Both were well below what the car has done. got some...
IIRC the must 2 has the late model pattern.
The original torquer with the twisted carb is a great race intake. I made 496 hp with a set of 289 heads and that intake .with the cam I had it...
Mike you went all that way to see those. yours is way cooler!:thumbs2:
MM72 is good advice. I use a gal of diesel ,kerosene and it really loosens it up with a brush, then purple power, then wash, covering all the...
I think you will find that the door key and the ign key are diff. the door key should be round ,while the ign key is sorta rectangular.
I use white lithium grease on the lifters,cam and rocker balls. stp will work on the pistons, but i use 20w-50 because i buy it by the case,and it...
be sure the pistons are on the rods right. the large radius on the rod goes to the outside of the crank. . i always torque one main at a time and...
Separate names with a comma.
