Will the disc break spindles from a 74 maverick also swap to a 65 mustang? Thanks, Mark
Thanks, they are half gone allready! Very tasty!:)
a nice cookie we made today! Shot gun Snow man...
You can change your settings on the private message option. go to the user cp, click edit options, and enable the notify me for private messages....
sounds like time to lay out the good old fasioned trade blanket...
Yes! They are the original ones. Hehe...
Where can i find the "barrel nuts" for the instalation of the fender emblem. Does anyone have some to sell me?
I just went through a similar problem. The carb wasn't getting gas. So I blew the lines out. Blew out the filter. Still nothing!. Blew the lines...
Cool, thanks...I will do that!
Ok, I did everything I could to seperate the upper ball joint. I broke one Ball joint separator and bent the other. I used a huge 6# hammer and no...
Is this the spot? Ps: Mavaholic, hope to meet you at the silver springs show!
Yup! sounds like you were at tdc for the exaust stroke. Just do like Antjc600 said. Just to be sure...Make sure your on plug #1...
Which one is grounded? None of the wires in the jpg i posted should be grounded to a negative source.! The only one grouned is the...
Make sure your starter solenoid is not mounted up side down. (i had this goofy thing happen to me ) It can make things confusing to the unaware....
Hope this helps...
Man, I would just cut the steel break line off with a dremel cut-off-wheel or some other cut off wheel. Take the mess on out. Put it in a vise,...
post it on the parts wanted forum. Your sure to get a reply! Mark
I did it with a 302 and c-4 . Took the fan off, left water pump on. Had my son grab the end of the tranny to guide it in. Went in with no problem....
nope! Mine to was originally points that i converted to electronic (duraspark ll ) The dist. you need...if thats the case... would be the same...
Bill, the most economical way is to go to a junk yard and get these following parts of a 70's manual disc break Ford Granada. 1.Front...
Separate names with a comma.
