IMO I would stay away from the T-5 for an LS motor unless it is a built T-5. I would go with a T56 and call it a day or TKO 500 or 650. I've seen...
Looks good! :thumbsup: Coming along real nice. I think your car will be ready before mine though :cry:.
An LS2 should be right at 400hp stock. In the 05-06 GTO's they were rated at 400hp from the factory, actually most make more than that. If I had...
Is it even worth the chance? If its a choice of being burned horribly for life or taking an hour to 2 to remove the tank...I will take the extra...
Welcome from Sebring FL
YEP its called sand bending its what the ol' timers use to do. You fill the pipe with sand and cap both ends. This keeps the pipe from bending on...
18x10 in the rear with a 285-295 tire, 18x8 with a 225 tire in front. I have a few wheels in mind. #1 wheel choice is the Foose Nitrous.
This sits pretty much flush with the frame rail. In the rear its sits inward about an inch or so this is due to the stock frame rail turning...
Its was a univeral kit I bought off another member on here that sold his project and didnt use it. I had to modify everything but the lower bar...
I doubt it. I really wasnt planning on using the stock back seat. Im way beyond stock at this point lol. You could always narrow the seat frame I...
Tri-4 link setup with coilovers.
I cut it in the wrong place!:D Its fixable but I wish I had a spare wheel tub to start over. Oh well I've never done this before so It was a...
:whew: Well after screwing up one side I did it right on the drivers side! It's a mistake I can fix but would have been nice not to have to do....
Thanks thats just what I needed. Im going to go with a 65/68 16 gallon. Should work perfect. Going to build a structure out of 1"x1" SQ tubing and...
THANKS for the help!
I know a few of you guys are running Mustang gas tanks. I need someone to get me some measurements on the tank. I need LxWxH. and these have the...
I will try and post some pics tonight. I will show you where I made my cuts etc. My mig bottle was waiting for me when I got home yesterday so now...
Were the old pads OEM?
I work at a Nissan dealership in the service department. Usually that noise is caused by either the sliders or the shims. Most of the times its...
I got just the crossmember because I already had the tubular a-arms and I wanted to run a different setup than what they had. Thing was the...
Separate names with a comma.
