When I did mine I didn't like that the fan was only 1/4" from the water pump. I think my Griffin radiator is a little thicker than stock, too. I...
I'm not big on Teflon tape my self. When used on tapered fittings it can break off in little strands that go places you don't want it to.
They're only required to put the date code on one sidewall, right after "DOT". Tires made before 2ooo might only have one digit for the year since...
Manufacture date code on the tire is the 5th week of 2006. Still don't remember when I bought it.
Nothing wrong with the alignment. Don't remember when I bought them, I'll have to look for a date code. Who knows how long they sit on a dealer's...
Driving the Maverick home from a car show Friday afternoon it started pulling to the left, then the right, then the left, etc. Here's what I...
The kit I mentioned in post 13. Summit had sale going on at the time and I got it for something like $180. https://www.summitracing.com/parts/tnh-3300
After you make an adjustment roll the car backward about 6 feet and then forward again to settle the suspension. Recheck your setting. Also, once...
Depends on what carb you have if that's a good idea or not. Holleys are designed to meter air flowing across the top. Straight down air flow can...
I have a Mustang scoop on mine, larger opening than the two snorkels on a Grabber hood. Unless the car is sitting still nothing goes in there, not...
The way a Maverick's hood slants up in the front keeps air from going in almost any scoop that has it's opening at the surface of the hood.
Up until last year I had degreed slip plates, a bubble caster/camber gauge, and a caliper-type toe gauge. Probably had them for 20-25 years. In my...
Buy one of these and do your own alignments. Does caster, camber, and toe. I bought mine with a discount coupon. Two alignments and it pays for...
I use Permatex thread sealer myself.
That is a retrofit cam with reduced base circle lobes for use in older blocks. He has a roller block and should run a full size cam.
Do we have an idea how many are attending? Is Friday's excursion still on? I see Sullivan county, where the hotel is located, just moved from...
Just changed the oil, doing a coolant flush'n fill now. Want to install my MeterMatch to calibrate the gas gauge. Not so bad when I'm putting...
And, speaking from experience, make sure your spare fits the new hubs, too. Never thought about it until I was on my way to Roundup one year and...
What year T5?
If someone else posted this already, I missed it. The Ford Nationals have been rescheduled to July 31 - August 2.
Separate names with a comma.
