I know earlier ones are made out of blue plastic and they don't have the same problem as the white plastic ones. I believe they are fully...
The "rusted shut" thing is the water valve for the heater. When working properly, it shuts the flow of hot water off to the heater core when you...
I have a couple of picture "articles" with comments on making this repair on my site. It is not easy or fun. I had to remove the hood, fenders,...
This arrow points to the aforementioned vent cap...
Of course none of the Mustang guys know this...the Maverick and the Mustang share the same "birthday"..only 5 years apart! April 17th 1964, vs....
Solid Black= ground Black/Green= main accessory power(switched by the key) Yellow= main power(non-switched) ltGreen/Red=ignition...
If you want to add factory style EFI, I would definitely take the entire wiring harness. This is what I used as the basis for mine(harness out of...
With a little modification to the oil fill hole, I even got them to fit on my EFI equipped motor :) [IMG]
I think it was 'Its_Not_Safe' who originally posted it(could be wrong)... anyway, he had asked why there there were no Maverick chat rooms in...
(wind blows and tumbleweeds roll by...)~~~~~~~~~~~~~
So...what happened to the post about where to find Maverick chat rooms?
The cigarette lighter wire is an excellent choice for this purpose..it should be light blue with a white stripe...
This is almost certainly a ground problem. Check the left tail light socket inside the trunk. The tail light/brake light bulb grounds itself...
Power bleeders are nice...makes the job go faster, and one person can do it since no one has to step on the pedal. I have a power bleeder from...
Here is a link to wiring diagrams if you need them: Maverick Wiring Diagrams
this is true..damn, that could be serious problem! :eek: Best to think these things thru... Maybe you could make a makeshift puller..do you...
if pushing it the one way will not get the starter to go, definitely try going the other direction...you may have the car in ACC instead of RUN!...
The switch is spring loaded..with enough force it should engage the starter and when you let go it would go into run. If it doesn't seem to...
Here is another pic..those are the two bolts that hold the column up. If it is the plastic piece I think it is, there it is kind of clipped on...
Separate names with a comma.
