Air trap? This is how I did mine and it works fine. Earlier I said about putting it in the top radiator hose, I meant to say top heater hose. [IMG]
Or you can just put a tee for the gauge sensor in the top radiator hose. Separating the relay from the gauge should take care of your problem.
Hood hinges with springs.
:Welcome: from south central PA. You can see in my sig I'm not partial about keeping a 70 Grabber stock.
The fan sending unit is just a switch, turns on and off at specific temperatures. Your gauge needs a thermistor type sensor that varies resistance...
I have a 3G 1-wire on mine. Often they run the yellow sense wire to the output terminal on the rear of the alternator. Then it doesn't adjust for...
Their '72 Maverick has a '70 grill...
The only difference I've seen between hoods is later ones have a flat portion in the support structure to accommodate an air conditioning compressor.
Did you do anything to the P heads?
It's great being able to make adjustments by pushing buttons instead of draining fuel and changing jets.
Again, it depends on how the cam gear is heat treated. The Comp XE cam in my signature is cast (SADI) but needs a steel distributor gear. Best...
Depends on the cam and how the gear on the cam is heat treated, not all roller cams need a steel gear. SADI cam cores can have the gear heat...
The one in your hand appears to be a coated steel gear. The one on the distributor is cast.
There were 3 denial of service internet attacks on the east coast today.
Just clean all of the bare copper contacts with a pencil eraser. Bulb sockets too. As mentioned, all the regulator does is supply a constant 5V or...
Autokrafters has the same junk.
Oh sure, after I just installed a Mustang tank in my 70 last year.... I'll still be interested to see this.
Mine's connected to the battery and runs on low until it cools down. It cycles on and off 4 or 5 times and then it's done.
:Welcome: I'm not big on green cars but I like that!
The gas cap is part of the vapor purge system. My Chrysler 300 has had the check engine light come on sporadically ever since the car was a month...
Separate names with a comma.
