keep in mind, hydraulic roller lifters

Posted by 74merc (IP: 207.157.61.97) on July 12, 1999 at 12:40:23:

In Reply to: .. posted by Erik on July 10, 1999 at 14:37:35:

are only good to like 6500rpm. The spring tension required for the valves at that rpm is too high and will compress the hydraulic lifters. Thats what got me off of my roller lifter plans...

Follow Ups:

• Re: keep in mind, hydraulic roller lifters Erik (IP: 209.179.25.55) 7/13/99 (0)
• "ONLY" 6500 rpm ?!!!... T.L. (IP: 206.133.172.140) 7/12/99 (8)
  • Re: "ONLY" 6500 rpm ?!!!... Dan Starnes (IP: 209.119.6.151) 7/16/99 (2)
    • Doesn't count unless it's under a load, n/m T.L. (IP: 158.252.164.19) 7/16/99 (1)
      • agreed, but... 74merc (IP: 209.149.123.171) 7/17/99 (0)
  • maybe for you... 74merc (IP: 209.149.123.147) 7/13/99 (4)
    • Your 302 won't even pull to 6500. T.L. (IP: 206.133.171.12) 7/13/99 (3)
      • how enlightening... 74merc (IP: 209.149.123.175) 7/14/99 (2)
        • All I'm sayin' is... T.L. (IP: 158.252.163.86) 7/14/99 (1)
          • if you woulda said that in the first place 74merc (IP: 209.149.123.171) 7/14/99 (0)

Post a Followup