been told not to drill and tap for 351 headbolts>>>

[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]

Posted by 74merc (IP: 207.157.61.97) on July 12, 1999 at 12:43:02:

In Reply to: Re: Time for another dumb question from my place posted by 1BADMAV on July 10, 1999 at 16:34:26:

dunno what the real difference is, but I was told the 302 didn't have quite as much to work with around the cylinder walls, if you drill it for 1/2 inch headbolts, you tend to run into trouble...



Follow Ups:


Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]