Posted by Justin (IP: 205.188.192.159) on April 28, 1999 at 14:36:09:
ok well i ordered my pst front end kit and i basically have everything off of the front end now but i cant get the coil springs out i have tried using the loner spring compressor from auto zone but when i would tighten it up the "bolt" in the center would bottom out on the spring pearch and i wouldnt move it and i was affraid if i unbolted the pearch the spring would get loose and kill me or somthing so if im doing somthing wrong or if anyone has any advise please let me know.
thanks