Posted by Chris (IP: 216.215.109.130) on July 28, 2000 at 15:12:39:
In Reply to: try this posted by jcn on July 28, 2000 at 13:51:34:
i figure something is screwed, i put my 3' breaker bar on one of my cheap sockets (so if it breaks, no big deal) and turned to the point where the socket was ready to snap...no movement. Of course, the torque converter was spinning freely (and it's the correct one) when i had the transmission out, and the whole assembly was able to spin when i originally took it out (i had a blown piston in the transmission, which is why i pulled it). So...i guess i'm in trouble :o/