Posted by Mavman (IP: 192.62.107.213) on November 12, 1999 at 15:59:04:
In Reply to: Floor shifter questions posted by Erik on November 12, 1999 at 15:31:05:
I got a B & M Megashifter that is cable driven. All you gotta do is drill four holes for the mounting screws, and a larger hole for the cable end to fit through. Need someone on the bottom of the car to tighten the nuts on the mounting screws. It came with all the brackets necessary for the tranny. The cable is about 5 feet long, and it is coiled once, but works great. Came with two micro-switches. One for the backup lights, and one for the neutral safety switch. Just gotta run wires to the base of the steering column.