Posted by Brian (64.154.99.160) on February 14, 2001 at 18:18:46:
Okay, after only a year and half, I am finally trying to start my rebuilt 302. I am having no luck. I have spark, I have fuel. I am wondering if my timing is off or I have the wrong firing order. I am using an Accel 300+ box, Performer RPM cam/intake combo (cam is 4 deg advanced). I have a good ground on the engine block, I just can't seem to get the engine to fire. To set the timing, I rotated the engine over until the intake valve closed, continued until the piston was at the top of the stroke (used a long screw driver in the #1 s.p. hole), put the distributor so the rotor is right at #1. Still, no fire. Any ideas?