Drum Brakes pulling & Exhaust Flange Gasket.

Posted by Steve-S (IP: 24.28.68.29) on September 18, 2000 at 18:08:04:

I'm having a big problem with my brakes pulling to the left REAL HARD. I've loosened the left side brakes and tightened the right side brakes but it still does this. I just replaced the shoes recently and that's when this started. Any ideas? I've rebuilt both front cylinders and replaced both rear cylinders. But in a rebuilt Master Cylinder about 1 year ago.

Also having problems with my exhaust flange gasket. Seems to be going out rather quickly. The ones the part's store keeps selling me are of the clay/metal crush type. Is there a newer material gasket I could use there that would last longer? They seem to burn thru pretty quick.

Thanks in advance for all help.

Steve-S

Follow Ups:

• Re: Did you replace the "hardware" too? ... Steve-S (IP: 24.27.42.253) 9/20/00 (0)
• Did you replace the "hardware" too? ... Ron S. (IP: 152.163.194.177) 9/19/00 (1)
• You might have the strut bar bushings checked... Mavman (IP: 216.12.231.152) 9/19/00 (1)
• Re: Drum Brakes pulling Steve-S (IP: 24.28.68.29) 9/18/00 (2)
  • Re: You might have the strut bar bushings checked... Steve-S (IP: 24.27.42.253) 9/20/00 (0)
• Re: Drum Brakes pulling Russ (IP: 63.168.194.115) 9/18/00 (3)

Post a Followup