Posted by: 74Grabber ®
2001/09/15, 23:38:48
Author Profile
|
I have a pair of 95 heads off a 5.0. From what i can tell they are referred to as E7TE-6049-AB, anyways i am now in the process of staring at em and wondering what i need to get em running. I mean i know rocker arms and pushrods, but what kind? i want a decent and cheap as possible roller rocker. The cam kit is coming with springs, retainers, locks ect ect. So that said Do i need guide plates? what kind of push rods, and what roller tip rocker will work? oh, and a 1.6 or 1.7 rocker?
Side note... I am getting excited about this car, i got the headers, exhuast, 4bbl carb and manifold. I am using a Weiand single plane and a holley 600cfm. I got cheaper headers (paw) for now. I am going with a cam kit from comp cams - 275/280 219/233 .477/.510 110. I am not sure if i am over camming it at 8.0:1 compression and i am still unsure on the CC size of the 95 heads so i am not sure if i am decreasing compression as of yet. I also have a 2200 stall convertor and 3.00 gears, will be installing 3.80 gears in the next month or so. Anyways, thanks to ALL for putting up with my questions  DAvid
|
