Time for another dumb question from my place

[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]

Posted by Butch (IP: 205.188.199.166) on July 10, 1999 at 00:05:03:

Geez I hate to ask cuz it is probably a really stupid question but here goes: I'm putting 351W heads on my 302 so when I consider an intake, rockers etc. do I go with the ones for the 351 or the 302? I'd assume that I would use 351 stuff but have learned over my many years not to assume anything! Would appreciate any input.

Follow Ups:

Thanks! Butch (IP: 205.188.199.176) 7/11/99 (0)
Re: Time for another dumb question from my place 1BADMAV (IP: 205.188.198.58) 7/10/99 (4)
- been told not to drill and tap for 351 headbolts>>> 74merc (IP: 207.157.61.97) 7/12/99 (3)
  - Re: been told not to drill and tap for 351 headbolts>>> TParker (IP: 208.252.153.103) 7/12/99 (2)
    - Re: been told not to drill and tap for 351 headbolts>>> Butch (IP: 205.188.197.56) 7/12/99 (1)
      - Re: been told not to drill and tap for 351 headbolts>>> M.A.V. (IP: 152.163.213.81) 7/12/99 (0)
Re: Time for another dumb question from my place Erik (IP: 209.179.170.198) 7/10/99 (18)
- Wrong! Brandon (IP: 209.162.39.39) 7/10/99 (17)
  - Re: Wrong! Butch (IP: 205.188.198.37) 7/10/99 (0)
  - Re: Wrong! Butch (IP: 205.188.198.37) 7/10/99 (15)
    - Re: Wrong! T.L. (IP: 158.252.163.106) 7/11/99 (0)
    - .. Erik (IP: 209.179.26.68) 7/10/99 (13)
      - keep in mind, hydraulic roller lifters 74merc (IP: 207.157.61.97) 7/12/99 (10)
        
        Re: keep in mind, hydraulic roller lifters Erik (IP: 209.179.25.55) 7/13/99 (0)
        
        "ONLY" 6500 rpm ?!!!... T.L. (IP: 206.133.172.140) 7/12/99 (8)
        
        Re: "ONLY" 6500 rpm ?!!!... Dan Starnes (IP: 209.119.6.151) 7/16/99 (2)
        
        Doesn't count unless it's under a load, n/m T.L. (IP: 158.252.164.19) 7/16/99 (1)
        
        agreed, but... 74merc (IP: 209.149.123.171) 7/17/99 (0)
        
        maybe for you... 74merc (IP: 209.149.123.147) 7/13/99 (4)
        
        Your 302 won't even pull to 6500. T.L. (IP: 206.133.171.12) 7/13/99 (3)
        
        how enlightening... 74merc (IP: 209.149.123.175) 7/14/99 (2)
        
        All I'm sayin' is... T.L. (IP: 158.252.163.86) 7/14/99 (1)
        
        if you woulda said that in the first place 74merc (IP: 209.149.123.171) 7/14/99 (0)
      - Stock rocker ratio is 1.6:1...not 1.65 n/p T.L. (IP: 158.252.164.50) 7/12/99 (1)
        
        Re: Stock rocker ratio is 1.6:1...not 1.65 n/p Erik (IP: 209.179.25.55) 7/13/99 (0)

Post a Followup